>
This library will save you hundreds of hours of drawing time. And time
= money!
>
Contains over 1,000 steel shapes that are easily accessed from a pulldown
menu.
>
There's nothing to learn. Just load the library in AutoCAD and go!
>
30 day money-back guarantee. |
| Drawing each and
every steel shape you need for your structural layouts is a waste of valuable
time. With a click of the mouse, this comprehensive structural steel shapes
library will insert a cross section of the shape you need. All you do is
make your choice from the pull-down menu. |
It's easy
to use:
This library can
be easily loaded into AutoCAD or AutoCAD LT's menu bar for quick access.
Full instructions are included. There's no need to browse through folders
every time you need to insert a steel shape. It's user-friendly interface
allows you to simply point and click to choose from a wide range of steel
shapes. |
How it works:
Once loaded in AutoCAD
or AutoCAD LT, "Steel Library" will appear in the menu bar.
Step
1: Choose the steel shape you need from the pull-down menu.
.
.
Step 2: Insert
the steel shape block in your layout and rotate into position.
.
|
Details about the blocks:
This library was
created using the dimensions you'll find in the "AISC Manual of Steel Construction,
Load ? Resistance Factor Design Volume 1, Second Edition". Every effort
has been made to ensure accuracy, but in some instances fillet dimensions
are not defined in this version of the AISC Manual and were taken from
older versions of the manual. It is recommended that if these dimensions
are critical, reference should be made to the certified dimension sheet
obtainable from the steel shape manufacturer. |
| You'll be able to
select from a wide range of steel shapes, each drawn at a scale of 1:1
and on layer zero with "Byblock" attributes. Once inserted, simply rotate
the shape into position and it will be to scale and will take on the characteristics
of your current layer settings. The Byblock attribute allows you to override
your current layer's settings, giving you the ability to change the color
or linetype of the symbol without exploding it. |
| Crosshatching is
not included with the blocks because it is usually on a separate layer
and color. The insertion point of each shape is at a midpoint common
to each particular steel shape. |
An additional
bonus:
All of the steel
shape blocks are drawn as closed polylines or regions. If you're
creating a 3D steel layout, all you have to do is insert the shape you
need, explode it, and then extrude it. |
|
Buy
Now | Download demo
|
Here's what
you get:
The "Steel Shapes
Library" comes with a total of 1,143 accurately drawn symbols in the following
categories: |
-
Flanged beams
W Shapes: sizes
W4 through W44
S Shapes: sizes
S3 through S24
M Shapes: sizes
M5 through M12
HP Shapes: sizes
HP8 through HP14
-
Channels
American Standard
Channels: sizes C3 through C15
Miscellaneous Channels:
sizes MC6 through MC18
-
Angles
Equal Leg Angles:
sizes 2"x2" through 8"x8"
Unequal Leg Angles:
sizes 2 1/2"x2" through 9"x4"
-
Structural tube
Square: sizes 1
1/2"x1 1/2" through 30"x30"
Rectangular: sizes
2 1/2"x1 1/2" through 30"x24"
.
-
Structural pipe
Standard, extra
strong, double extra strong: sizes 3" through 12"
.
-
Structural tees
WT Shapes: sizes
WT2 through WT22
MT Shapes: sizes
MT2.5 through MT6
ST Shapes: sizes
ST1.5 through ST12
|
System requirements:
-
Compatible with AutoCAD 2000 through 2010
and AutoCAD LT 2000 through 2010
-
30 megabytes of available disc space required
|
Pricing:
-
Single user license - $97.00
-
2 to 10 user licenses - $87.00 each
-
Unlimited user license - $1,000.00
|
30 Day Money-Back Guarantee:
If you're not
satisfied with your purchase, return it for a full refund. |
Try before
you buy!
Download the
"Steel Shapes Library v1.0"
DEMO version.
|
|
How
to order:
Select the method you prefer:
|
